How Can I fix my Apple iPad Black Screen Problem?

 An iPad black screen can be the reason for enormous concern, as you'll often find it referred to as an iPad black screen of death. Though, if your tablet's screen is black and unresponsive, you should not give up.

There're some efficient ways to troubleshoot it and get your device in working condition. Even if your iPad is running iOS 15 or above, you can have it fixed with the methods in this article.

Check the port for the iPad's black screen

If you see a black screen on your device, then it might have run out of battery. Though, the problem might not be as simple as that. To make sure that your iPad is charging perfectly, you had better check its charging port. If you see little visible damage, then your table might not be charging.

Charge your iPad with a certified cable

Another thing that you need to test out for the black screen on your iPad is the cable and charger you're using. Several fake cables do not work rightly, and they might also carry a plug-in virus and your device mightn't be charging.

If you're updating the operating system to the latest version and plug the Apple iPad or iPhone with the 3rd party cable, errors like iPad screen of death are very likely to occur. For this reason, remember to only use an Apple MFi Certified Cable & charger.

Force restarts the iPad to fix the issue

iPad black screen often means that has stuck on this screen due to some software crash. It can simply be solved by forcing a restart that'll close all active apps, including the troublesome ones. The hard reset is easy, even though you'll need to follow a different procedure, depending on the device you own. And this method might save your device with a black screen if you meet this issue during an iOS update.

If the black screen is on a device with no Home Key, you've to do the following:

• Press the volume up and down buttons one after the other. Bear in mind to quickly let go of every button.
• Press the power key at the top of your iPad. Keep holding it until the Apple logo is shown on the screen.

If your iPad has a home button, you've to follow a different procedure:

• Simultaneously hold the home and power keys. Keep holding them until the device turns black.
• You can let them go when your device has restarted and the Apple logo has become visible on the screen.

Burp the iPad to fix the black screen

A simple solution to the black screen that has been proven to be efficient is burping your iPad. The name comes from the movement that resembles the one you make when your burp a child. This movement will help move the internal cables that mightn't be connecting rightly. In more detail, to burp the device you need to follow these steps -

• Take a soft towel &cover both the front and the back of your iPad.
• Pat your device's back for about one minute. Remember to not apply extreme pressure.
• Remove the towel and switch on your iPad.

Use the iPad OS repair tool to fix the black screen

If you want to try a solution with a high success rate, then Umendit is the perfect tool for you. This tool is simple to use when you do not have any technical knowledge. Its intuitive interface will guide you to repair any iPad problem you might encounter with just a few clicks.

It has powerful features that only need a computer and a cable. If you pick to do a standard repair, the program will fix the problem without data loss. Most importantly, the tool is compatible with iPad OS and iOS.

The step-by-step will show you how to use Umendit to repair the black screen issue –

• Download and install the tool on your Mac or laptop, and then launch it. Click the standard repair to start the procedure.
• Use a cable to connect your iPad to your laptop. Umendit will automatically try to detect it. Once it does, you’ll be taken to the next step. In case it does not the tool will provide you with detailed & illustrated instructions on how to place your iPad in recovery mode.
• Then, the tool will detect the firmware that’s the most suitable for your device. You can download this to pick another one from the list. Click next to download the firmware.
• Once the firmware becomes available, click start to fix your iPad, after several minutes, go by, and your iPad will restart.

Restore your iPad via iTunes/Finder

If your iPad is stuck on an iPad black or white screen, then you can restore it by putting it in recovery mode. It’ll allow you to connect it to iTunes and update or restore your iPad, which is often the solution to the iPad's black screen.

Before you start the procedure, ensure that you’ve installed the latest version of iTunes/Finder. The procedure for putting your iPad into recovery mode will be different, depending on the device model you own.

Note – This technique will ease your device. Think twice if you’ve had no backup before.

To restore an iPad without a home key, you have to follow these steps:

• Connect your iPad to your laptop or Apple computer.
• Press the volume up and down keys in succession. You do not have to keep holding either of them.
• Hold the power key at the top of your iPad.
• iTunes will detect your device and will show you a message to restore or update it. Pick restore and confirm your action.

To restore a device with the home button, you have to follow these steps:

• Plug your device into your Mac or PC.
• Press down and hold the home button and top buttons at the same moment.
• You can let go only when you see the recovery mode display.
• Select restore on the pop-up window and confirm your action.

Fix iPad black screen by DFU Restoration

Another method to solve the issue is through DFU restoration. With this method, you’ll reset your device to its factory settings, which will delete all of your apps, data, and settings. For this reason, it’s vital to keep a backup before you use it. The procedure of putting your iPad into DFU mode differs, it depends on the iPad you’ve.

iPad with a home button can be put to DFU mode with these simple steps:

• Plug your device into your PC with a lighting cable.
• Launch iTunes, depending on which application is on your OS.
• Then, press the home and power keys at the same moment. Keep applying pressure, until the display turns completely black.
• Count to 3, then let go of the power key without releasing the home button.
• Keep applying pressure on the home key until your iPad gets detected by iTunes.

A device without a home button needs a different procedure to go into DFU mode. The procedure is the following:

• Ensure that your iPad is connected to your PC.
• Quickly press the volume up key first and then the down button. Press and hold the side key until the screen turns black.
• As soon as the screen goes black, push and hold the volume down key without releasing the power button. You’ve to apply pressure on both of them for about six seconds.
• After this, you have to release the power key but keep pressing the volume down button. Keep pressing it for about five more seconds.
• Your iPad will get detected by running iTunes on your PC.

In both cases, you’ll know that your device is in DFU mode when the screen turns completely black and you can see a message that iTunes has detected a device in recovery mode. If you see the Apple logo, then your device is not in DFU mode and you need to start over.

If it was put in this mode smoothly, you’ll see a window asking you to restore the iPad before using it. Click Okay and then restore the device to finish the procedure. Bear in mind that this procedure will delete all of your data.

Bottom line…

The issue of the iPad's black screen or blue screen is common and a source of worry. There’re various methods have been listed in the post. However, the problem is a serious one. Try all the above methods to fix it. If the issue still exists, now you need a professional to fix your iPad. And if you’re in New Jersey and looking for a professional repair expert, iMobilerepairs is here to help you.